A clearance suffix reads like a grade. C3 sounds one notch looser than normal, C4 one notch looser again, and the same on every bearing in the box. It is not a grade. It is the name of a window, and the window is printed per bearing type and per bore band. Take the suffix off a bearing and you have narrowed the question; you have not answered it.
Same codes, 41 tables
Every table here is ISO 5753-1, and every one of them uses the same 5 group codes in the same order: C2 / CN / C3 / C4 / C5. 397 of the 764 bearings in this database carry one, on 37 of its 40 bores. The other 367 belong to the 5 types with no radial clearance table, for reasons that differ by type and are set out on the bearing pages.
What changes from table to table is not the code list. It is the arithmetic:
- Deep groove ball: 18 bands, 6 to 315 mm
- Self-aligning ball: 10 bands, 6 to 100 mm
- Cylindrical roller: 7 bands, 10 to 100 mm
- Spherical roller: 6 bands, 24 to 100 mm
So the band boundaries are not shared. At 20 mm the 3 types that have a table there already use 2 different bands — Deep groove ball 18–24, Self-aligning ball 18–24, Cylindrical roller 10–24. The same shaft, a different line of a different table.
One bore, 4 tables
25 mm is the bore where all 4 tables meet, and here the tables happen to agree on the band: 24–30 mm for every one of them. Same bore, same band, same 5 codes — so anything that differs in the table below is the type, not the size.
| Type | Example | Bore band (mm) | C2 | CN | C3 | C4 | C5 |
|---|---|---|---|---|---|---|---|
| Deep groove ball | 61705 | 24–30 | 1–11 | 5–20 | 13–28 | 23–41 | 30–53 |
| Self-aligning ball | 1205 | 24–30 | 5–16 | 11–24 | 19–35 | 29–46 | 40–58 |
| Cylindrical roller | NU205 | 24–30 | 0–25 | 20–45 | 35–60 | 50–75 | 70–95 |
| Spherical roller | 21305 | 24–30 | 15–25 | 25–40 | 40–55 | 55–75 | 75–95 |
Read the C3 column across: 4 windows from 13 to 60 µm. The deep groove ball window and the spherical roller window do not even touch — 13–28 against 40–55 — so no single reading is C3 on both. Across all 5 groups the tables together cover 0 to 95 µm.
They also do not share an origin. The cylindrical roller table opens C2 at 0 µm; the deep groove ball table opens it at 1. These are 4 separate documents that happen to use one vocabulary, not one document with several lines in it. That is why "the clearance for a 25 mm bearing" is not a lookup with one answer.
One reading, 4 labels
Now take a single measurement: 45 µm on a 25 mm bore. Nothing about the number says what it was measured in, and the tables disagree:
| Type | Ranges that contain it (µm) | Code |
|---|---|---|
| Deep groove ball | 30–53 | C5 |
| Self-aligning ball | 29–46 and 40–58 | C4 or C5 |
| Cylindrical roller | 20–45 and 35–60 | CN or C3 |
| Spherical roller | 40–55 | C3 |
One gauge, one reading, and the label runs from CN to C5. In 2 of those rows the reading fits two codes at once: even inside a single table, 45 µm is not enough to name the group. A suffix narrows the window; it does not fill it in.
Inside one table the windows overlap too
A single table is a single bore band, so the band cannot be blamed for this one. Even inside one band, adjacent groups are not laid end to end. Across the 41 tables there are 164 adjacent pairs: 135 share a stretch of values, 27 meet at exactly one value, 2 leave a hole.
| Type | Adjacent pairs | Overlap | Touch | Gap | Overlap width (µm) |
|---|---|---|---|---|---|
| Deep groove ball | 72 | 72 | 0 | 0 | 5–25 |
| Self-aligning ball | 40 | 40 | 0 | 0 | 3–7 |
| Cylindrical roller | 28 | 23 | 3 | 2 | 5–10 |
| Spherical roller | 24 | 0 | 24 | 0 | — |
The ball tables overlap at every one of their 72 pairs, by 5–25 µm. The widest in the whole library is 25 µm, in the 280–315 mm band, where C5 begins at 245 µm while C4 runs on to 270: every reading from 245 to 270 µm satisfies both labels, and no row in the table says which one the maker meant.
The spherical roller tables are the opposite case, and the clearest argument for the word "group" being misleading. At the 24–30 mm band their five windows are 15–25 / 25–40 / 40–55 / 55–75 / 75–95 — they tile the range end to end, and the only value two groups share is the boundary itself, 40 µm, the top of CN and the bottom of C3. Whether that tiling is deliberate is not something these tables say. This database reports it and does not explain it.
Two holes
Two pairs go the other way and leave values that no group claims at all:
| Type | Bore band (mm) | C4 ends at (µm) | C5 starts at (µm) | Uncovered (µm) |
|---|---|---|---|---|
| Cylindrical roller | 65–80 | 125 | 130 | 126–129 |
| Cylindrical roller | 80–100 | 140 | 155 | 141–154 |
A cylindrical roller bearing that measures 126 µm in the 65–80 mm band is not in C4 and not in C5. The first hole is 4 µm wide, the second 14 µm — in a table that otherwise counts in whole micrometres, that is not a rounding artefact.
Whether the hole is intended — whether C5 is meant to start where C4 stops — is not something this database can settle. What it can say is narrower and still useful: the reading is not in any group the table prints, and "not in any group" is a different statement from "out of tolerance". The bearing may be perfectly good and simply not covered by the document.
Choosing with this in mind
- Look up the table by type and bore, not by code. Every bearing page prints its own, and the ISO 5753-1 page says which types it covers and which it does not.
- Read the suffix as a bin. Two bearings marked C3 can differ by more than the gap between C3 and CN, because the two readings may sit at opposite ends of one window.
- When a reading lands in an overlap, the marking cannot settle which bin shipped. It is consistent with both, and measuring again does not help — the overlap is in the document, not in the measurement.
- When a reading lands in a hole, go back to the drawing. The table has nothing to say about that value, and guessing the nearer group is a decision, not a lookup.
- Clearance here is pre-mounting. Pressing the inner ring onto a shaft, or running it hotter than the outer ring, takes micrometres straight out of the running clearance — which is the whole reason C3 exists on motor shafts, and why the same bearing measured before and after mounting gives two different numbers.
What this page does not say
- Axial clearance for tapered roller bearings is set when the bearing is mounted, as an end float in millimetres. The radial table is the wrong document for it, and this database does not carry the axial one.
- Thrust ball bearings have no radial clearance to state.
- Needle roller bearings are the awkward case: ISO 5753-1 gives them a table, and the bores here fall inside it, but the catalogue reproductions consulted disagree in every group, so no table is printed. The reason is on the needle roller pages, where it belongs.
- Tolerance class, preload and sealing are not encoded. They are separate decisions that share the suffix field with clearance.
- Load ratings, limiting speeds and mass are catalogue figures that differ between makers for the same designation, so they are absent rather than averaged into something that looks authoritative.
- The numbers are the table endpoints, in micrometres, pre-mounting. They are reproduced here as ISO 5753-1 values because independent sources agree cell for cell on them; that agreement, not the standard's name, is what this database requires before it calls a number standard.
The other two numbers in a designation are covered by the bore code and the outside diameter.