Fastener Sizes

22 metric diameters and 18 inch sizes, each with its own page listing every standard that covers it. Rivets are not on this axis: they carry no thread, so they are indexed by shank diameter on the rivet page.

Metric diameters

coarse pitch series
SizeMajor Ø (mm)Coarse pitch (mm)Tap drill (mm)
M220.41.6
M2.52.50.452.05
M330.52.5
M3.53.50.62.9
M440.73.3
M550.84.2
M6615
M881.256.75
M10101.58.5
M12121.7510.25
M1414212
M1616214
M18182.515.5
M20202.517.5
M22222.519.5
M2424321
M30303.526.5
M3636432
M42424.537.5
M4848543
M56565.550.5
M6464658

Inch sizes

UNC / UNF series and 6 washer sizes
SizeNominal Ø (in)Threads per inchTap drill (in)
4-400.112400.087
6-320.138320.1067
8-320.164320.1328
10-240.19240.1483
1/4washer0.25——
1/4-200.25200.2
5/16washer0.3125——
5/16-180.3125180.2569
3/8washer0.375——
3/8-160.375160.3125
1/2washer0.5——
1/2-130.5130.4231
5/8washer0.625——
5/8-110.625110.5341
3/4washer0.75——
3/4-100.75100.65
7/8-90.87590.7639
1-8180.875

Rows marked washer are washer designations, not threads. The 1/4 washer, for example, clears a 1/4 bolt — so it has no thread pitch or tap drill of its own. The dashes mean “not applicable”, not “not in the database”: the same diameter appears again on the next line as a thread.