Standards
Everything on this site that is defined by a published standard — grouped by the kind of part it governs, because the four groups are shaped differently and are read differently.
What is herefour groups, four page shapes
Fastener standards51 product · 3 property
Product standards carry a dimension table, and every specification page on this site is generated from one — so the table here is the same data the pages are built from, not a summary of them. Property standards fix what a class number promises; they have no dimensions at all.
Mechanical property standardsthe strength classes, not the dimensions
These fix what a class number actually promises — tensile strength, yield stress, hardness and the tests used to prove them — and are what the property classes on this site are quoted against.
The property-class system behind every metric steel bolt: it defines what 8.8 or 10.9 actually promises, and how each class is verified.
The stainless counterpart to ISO 898-1: it defines the A1–A5, C1–C4 and F1 material groups, and how a grade such as A2-70 or A4-80 encodes strength.
The inch-system strength standard: it grades bolts 2, 5 and 8 by proof, yield and tensile strength, and defines the radial-line head markings that identify them on a finished part.
DIN30 standards
| Standard | Title | Type | Size range | Sizes | Equivalent |
|---|---|---|---|---|---|
| DIN 912 | Hexagon Socket Head Cap Screw | Socket head cap screw | M2 – M24 | 15 | ISO 4762 |
| DIN 7991 | Hexagon Socket Countersunk Head Screw | Socket countersunk head screw | M3 – M20 | 11 | ISO 10642 |
| DIN 7984 | Hexagon Socket Head Cap Screw with Low Head | Low head socket cap screw | M3 – M16 | 8 | — |
| DIN 933 | Hexagon Head Screw / Bolt — Full Thread | Hexagon head bolt | M4 – M24 | 12 | ISO 4017 |
| DIN 931 | Hexagon Head Bolt — Partial Thread | Hexagon head bolt | M4 – M24 | 12 | ISO 4014 |
| DIN 934 | Hexagon Full Nut | Hexagon full nut | M2 – M24 | 15 | ISO 4032 |
| DIN 439 | Hexagon Thin Nut (Jam Nut) | Hexagon thin nut | M4 – M24 | 12 | ISO 4035 |
| DIN 985 | Prevailing Torque Hexagon Nut with Nylon Insert | Nylon insert lock nut | M3 – M24 | 12 | ISO 10511 |
| DIN 6923 | Hexagon Flange Nut | Flange nut | M5 – M20 | 8 | ISO 4161 |
| DIN 125 A | Flat Washer — Normal Series, 140 HV | Flat washer | M3 – M24 | 13 | ISO 7089 |
| DIN 127 | Spring Lock Washer — Square Section | Spring lock washer | M3 – M24 | 11 | — |
| DIN 916 | Hexagon Socket Set Screw — Cup Point | Socket set screw, cup point | M3 – M16 | 8 | ISO 4029 |
| DIN 914 | Hexagon Socket Set Screw — Cone Point | Socket set screw, cone point | M3 – M16 | 8 | ISO 4027 |
| DIN 915 | Hexagon Socket Set Screw — Dog Point | Socket set screw, dog point | M3 – M16 | 8 | ISO 4028 |
| DIN 913 | Hexagon Socket Set Screw — Flat Point | Socket set screw, flat point | M3 – M16 | 8 | ISO 4026 |
| DIN 84 | Slotted Cheese Head Screw | Cheese head screw | M2 – M10 | 9 | ISO 1207 |
| DIN 85 | Slotted Pan Head Screw | Pan head screw | M2 – M10 | 9 | ISO 1580 |
| DIN 963 | Slotted Countersunk Head Screw | Countersunk head screw | M2 – M10 | 9 | ISO 2009 |
| DIN 660 | Round Head Rivet | Round head rivet | 1 – 8 mm | 13 | — |
| DIN 661 | Countersunk Head Rivet | Countersunk head rivet | 1 – 8 mm | 13 | — |
| DIN 571 | Hexagon Head Wood Screw | Hexagon head wood screw | 4 – 20 mm | 9 | — |
| DIN 96 | Slotted Round Head Wood Screw | Slotted round head wood screw | 1.6 – 8 mm | 12 | CSN 021812; PN 82505; UNI 701 |
| DIN 97 | Slotted Countersunk Head Wood Screw | Slotted countersunk head wood screw | 1.6 – 10 mm | 13 | CSN 021814; PN 82503; UNI 702 |
| DIN 7981 | Cross Recessed Pan Head Tapping Screw | Cross recessed pan head tapping screw | ST2.2 – ST6.3 mm | 8 | ISO 7049; CSN 021237; UNI 6954 |
| DIN 7982 | Cross Recessed Countersunk Head Tapping Screw | Cross recessed countersunk head tapping screw | ST2.2 – ST6.3 mm | 8 | ISO 7050; CSN 021247; UNI 6955 |
| DIN 529 A | Anchor Bolt, Form A | Anchor bolt | M8 – M64 | 12 | CSN 021391 |
| DIN 529 B | Anchor Bolt, Form B | Anchor bolt | M8 – M64 | 12 | CSN 021391 |
| DIN 529 C | Anchor Bolt, Form C | Anchor bolt | M8 – M64 | 12 | CSN 021391 |
| DIN 529 E | Anchor Bolt, Form E | Anchor bolt | M8 – M48 | 10 | CSN 021391 |
| DIN 529 F | Anchor Bolt, Form F | Anchor bolt | M8 – M48 | 10 | CSN 021391 |
ISO17 standards
| Standard | Title | Type | Size range | Sizes | Equivalent |
|---|---|---|---|---|---|
| ISO 4762 | Hexagon Socket Head Cap Screw | Socket head cap screw | M2 – M24 | 15 | DIN 912 |
| ISO 10642 | Hexagon Socket Countersunk Head Screw | Socket countersunk head screw | M3 – M20 | 11 | DIN 7991 |
| ISO 7380 | Hexagon Socket Button Head Screw | Button head socket screw | M3 – M16 | 8 | — |
| ISO 4017 | Hexagon Head Screw — Full Thread, Product Grade A/B | Hexagon head bolt | M4 – M24 | 12 | DIN 933 |
| ISO 4014 | Hexagon Head Bolt — Partial Thread, Product Grade A/B | Hexagon head bolt | M4 – M24 | 12 | DIN 931 |
| ISO 4032 | Hexagon Regular Nut, Style 1 | Hexagon nut | M2 – M24 | 15 | DIN 934 |
| ISO 4035 | Hexagon Thin Nut, Chamfered | Hexagon thin nut | M4 – M24 | 12 | DIN 439 |
| ISO 10511 | Prevailing Torque Hexagon Nut with Non-Metallic Insert | Nylon insert lock nut | M3 – M24 | 12 | DIN 985 |
| ISO 4161 | Hexagon Flange Nut | Flange nut | M5 – M20 | 8 | DIN 6923 |
| ISO 7089 | Flat Washer — Normal Series, 200 HV | Flat washer | M3 – M24 | 13 | DIN 125 A |
| ISO 4029 | Hexagon Socket Set Screw — Cup Point | Socket set screw | M3 – M16 | 8 | DIN 916 |
| ISO 4027 | Hexagon Socket Set Screw — Cone Point | Socket set screw, cone point | M3 – M16 | 8 | DIN 914 |
| ISO 4028 | Hexagon Socket Set Screw — Dog Point | Socket set screw, dog point | M3 – M16 | 8 | DIN 915 |
| ISO 4026 | Hexagon Socket Set Screw — Flat Point | Socket set screw, flat point | M3 – M16 | 8 | DIN 913 |
| ISO 1207 | Slotted Cheese Head Screw — Product Grade A | Cheese head screw | M2 – M10 | 9 | DIN 84 |
| ISO 1580 | Slotted Pan Head Screw — Product Grade A | Pan head screw | M2 – M10 | 9 | DIN 85 |
| ISO 2009 | Slotted Countersunk Head Screw — Product Grade A | Countersunk head screw | M2 – M10 | 9 | DIN 963 |
ASME4 standards
| Standard | Title | Type | Size range | Sizes | Equivalent |
|---|---|---|---|---|---|
| ASME B18.2.1 | Hex Head Cap Screw — Inch Series | Hex head cap screw | 1/4-20 to 1-8 | 8 | DIN 933 |
| ASME B18.3 | Socket Head Cap Screw — Inch Series | Socket head cap screw | 4-40 to 3/4-10 | 10 | DIN 912 |
| ASME B18.2.2 | Hex Nut — Inch Series | Hex nut | 1/4-20 to 1-8 | 8 | DIN 934 |
| ASME B18.22.1 | Plain Washer — Inch Series | Flat washer | 1/4 to 3/4 | 6 | ISO 7089 |
Bearing standards7 ISO standards
Bearing standards hub →These are not product tables. Each one fixes a single thing about a bearing — how the diameter series are laid out, how much internal clearance a suffix promises, how a tolerance class is written — and they are cited on the designation pages rather than generating them.
| Standard | What it fixes | Edition |
|---|---|---|
| ISO 15 ISO | Boundary dimensions Boundary dimensions, general plan | ISO 15:2011 |
| ISO 5753-1 ISO | Internal clearance Radial internal clearance | ISO 5753-1:2009 |
| ISO 582 ISO | Chamfer maximums Chamfer dimension limits | ISO 582:1995 |
| ISO 492 ISO | Tolerance classes Tolerance classes and symbols | ISO 492:2023 |
| ISO 281 ISO | Rating life Rating life, and why no ratings appear here | ISO 281:2007 |
| ISO 1206 ISO | Needle roller dimensions Needle roller boundary dimensions | ISO 1206:2023 |
| ISO 3245 ISO | Drawn cup dimensions Drawn cup boundary dimensions | ISO 3245:2023 |
Thread standards10 systems · 210 sizes
Thread database →A thread standard is not a table of parts either: it fixes a profile — the flank angle and how depth is measured — and a progression of diameters and pitches. Every size below is tabulated on its system page with major, pitch and minor diameter and the tap drill.
| System | Standard | Sizes |
|---|---|---|
| ISO Metric | ISO 261 | 82 |
| Unified National Coarse | ASME B1.1 | 25 |
| Unified National Fine | ASME B1.1 | 23 |
| Unified National Extra Fine | ASME B1.1 | 9 |
| National Pipe Taper | ASME B1.20.1 | 14 |
| National Pipe Straight | ASME B1.20.1 | 11 |
| British Standard Pipe (parallel) | ISO 228-1 | 11 |
| British Standard Pipe (taper) | ISO 7-1 | 9 |
| Trapezoidal | ISO 2901 | 16 |
| ACME | ASME B1.5 | 10 |
O-ring series (AS568)6 series · 369 sizes
O-ring library →The dash numbers here are the AS568 series, not a metric series: the inside diameter and cross-section are fixed in inches, and the millimetre columns are conversions. There is no separate AS568 standard page on this site — the two dimensions the standard fixes are printed on every size page, and each series page lists them all.