6x6x8 — Weight and Board Feet
A 6x6 cut to 8 ft: 24 board feet of nominal section, and 1.6806 cubic feet of actual material to carry. Weight depends on the species, so it is tabulated below.
Quick specification6x6x8
| Nominal size | 6 × 6 in |
|---|---|
| Actual size (dry) | 5.5 × 5.5 in (139.7 × 139.7 mm) |
| Length | 8 ft (96 in) |
| Board feet | 24 bd ft |
| Actual volume | 1.6806 ft³ |
| Weight (Spruce (Sitka)) | 45.11 lb (20.46 kg) |
| Weight per foot | 5.639 lb/ft |
Board feet is a nominal-section convention; volume and weight use the actual section. The two are not interchangeable and are not meant to agree.
Weight by speciesall species in the database, lightest first
Wood database| Species | Density | 6x6x8 weight |
|---|---|---|
| Balsa | 0.16 g/cm³ | 16.79 lb · 7.62 kg |
| Cedar (Western Red) | 0.37 g/cm³ | 38.82 lb · 17.61 kg |
| Poplar (Yellow) | 0.42 g/cm³ | 44.06 lb · 19.99 kg |
| Basswood | 0.42 g/cm³ | 44.06 lb · 19.99 kg |
| Redwood | 0.42 g/cm³ | 44.06 lb · 19.99 kg |
| Spruce (Sitka) | 0.43 g/cm³ | 45.11 lb · 20.46 kg |
| Cedar (Eastern Red) | 0.47 g/cm³ | 49.31 lb · 22.37 kg |
| Hemlock (Western) | 0.47 g/cm³ | 49.31 lb · 22.37 kg |
| Cypress (Bald) | 0.48 g/cm³ | 50.36 lb · 22.84 kg |
| Fir (Douglas) | 0.53 g/cm³ | 55.6 lb · 25.22 kg |
| Pine (Southern Yellow) | 0.55 g/cm³ | 57.7 lb · 26.17 kg |
| Mahogany (Honduran) | 0.55 g/cm³ | 57.7 lb · 26.17 kg |
| Cherry (Black) | 0.56 g/cm³ | 58.75 lb · 26.65 kg |
| Larch | 0.58 g/cm³ | 60.85 lb · 27.6 kg |
| Teak | 0.63 g/cm³ | 66.1 lb · 29.98 kg |
| OSB (Oriented Strand Board) | 0.65 g/cm³ | 68.19 lb · 30.93 kg |
| Walnut (Black) | 0.66 g/cm³ | 69.24 lb · 31.41 kg |
| Ash (White) | 0.67 g/cm³ | 70.29 lb · 31.88 kg |
| Birch Plywood | 0.68 g/cm³ | 71.34 lb · 32.36 kg |
| Birch (Yellow Birch) | 0.69 g/cm³ | 72.39 lb · 32.84 kg |
| Bamboo | 0.7 g/cm³ | 73.44 lb · 33.31 kg |
| Maple (Hard Maple) | 0.705 g/cm³ | 73.96 lb · 33.55 kg |
| Beech (American) | 0.72 g/cm³ | 75.54 lb · 34.26 kg |
| Oak | 0.75 g/cm³ | 78.69 lb · 35.69 kg |
| MDF (Medium Density Fibreboard) | 0.75 g/cm³ | 78.69 lb · 35.69 kg |
| Hickory | 0.82 g/cm³ | 86.03 lb · 39.02 kg |
| Rosewood (East Indian) | 0.85 g/cm³ | 89.18 lb · 40.45 kg |
| Ipe | 1 g/cm³ | 104.91 lb · 47.59 kg |
Weights are derived, not quoted: density at about 12% moisture content × actual volume. Treat them as a floor — green stock stays heavier until it dries. The spread across species is roughly six to one, so a freight or support estimate that assumes one figure for “a 6x6” can be wrong by a large margin.
Board feet explainedhow 24 bd ft is arrived at
A board foot is 144 cubic inches of nominal section — a board an inch thick, a foot wide and a foot long. Lumber is bought and sold on that basis, so the calculation uses the nominal thickness and width rather than the dressed ones:
(6 × 6 × 8 × 12) ÷ 144 = 24 board feet
The rated price therefore covers more wood than is delivered, which is the long-standing convention rather than an error. The actual volume of material in the same piece is 1.6806 cubic feet.
Lengthhow 8 ft compares with the rest of the table
Frequently asked questionsabout a 6x6x8
How much does a 6x6x8 weigh?
In Spruce (Sitka), about 45.11 lb (20.46 kg). Across the species in this database it ranges from 16.79 lb in Balsa to 104.91 lb in Ipe.
How many board feet is a 6x6x8?
24 board feet, calculated from the nominal section: (6 × 6 × 96) ÷ 144.
What are the actual dimensions of a 6x6x8?
5.5 × 5.5 inches in section, 8 ft long — 139.7 × 139.7 millimetres by 8 feet. The nominal 6 × 6 inch call size is the rough green section.