AS568-010 O-Ring — 0.239 × 0.070 in
The -010 is a 000 series size: a 0.070 in cord on a 0.239 in inside diameter, which is 1.78 mm on 6.07 mm. Its outside diameter is 0.379 in (9.63 mm), derived as ID + 2 × cord.
Dimensionsthe two cells the standard fixes, and one derived value
| Dimension | Inches (AS568) | Millimetres (converted) |
|---|---|---|
| Inside diameter d₁ (ID) | 0.239 | 6.07 |
| Cross-section d₂ (cord) | 0.070 | 1.78 |
| Outside diameter (reference) | 0.379 | 9.63 |
| Inside diameter tolerance | ±0.005 | ±0.13 |
| Cross-section tolerance | ±0.003 | ±0.08 |
Inches are the standard’s own units; millimetre values are conversions — inch × 25.4, rounded to two decimals — and not the ISO 3601-1 metric sizes. Outside diameter is a reference value derived as ID + 2 × cross-section; the two diameters the standard fixes are the inside diameter and the cord.
Reading the designationnothing in AS568-010 is a dimension
The -010 is a lookup key. Its first digit — 0 — puts it in the 000 Series family, and the remaining two digits are its position inside that family counted upwards by inside diameter, which makes it number 10 of the 50 sizes here. Neither digit group carries a size: the -010 is 0.239 in on a 0.070 in cord, and a dash number one away from it can differ by a hundredth of an inch or by a quarter of one.
The same inside diameter, in another seriesa matching bore does not make two rings interchangeable
| Series | Dash | Cord (in) | Cord (mm) | ID tol. |
|---|---|---|---|---|
| 000 Series | -010 | 0.070 | 1.78 | ±0.005 |
| 900 Series | -902 | 0.064 | 1.63 | ±0.005 |
These rings share an inside diameter and nothing else. The cords differ, and so do the inside diameter tolerances on some of them — the tolerance is a per-size figure in the standard, not a function of the diameter, so it is printed rather than derived.