M10 × 1 reads like a pitch defined for a 10 mm thread. It is not. One millimetre is the coarse pitch of an M6 — same pitch, same flank angle, same go/no-go gauge. The only thing that changes is the diameter the thread gets cut on.

That is not one lucky match. This database carries 39 coarse metric threads and 43 fine ones across 39 diameters from M1 to M64, at one or two fine pitches each. 38 of the fine threads use a pitch that already exists as the coarse pitch of a smaller diameter. 5 do not, and every one of those sits at M1.8 or below.

Fine is a step down the ladder, not a new rung

Sort the metric range by pitch instead of by diameter and the two series stop looking like two series. The coarse threads use 24 distinct pitches, from 0.25 mm to 6 mm. The fine threads use 11, and 10 of those 11 are already on the coarse list.

So a fine pitch is not a new thread form invented for a larger bolt. It is the pitch the system already had for a body small enough to need it, reused at a larger diameter. "Fine" marks a position on the ladder, not a rung that exists only at that size. That also explains what a fine thread is good for: it is the same thread, cut on more material.

Where each fine pitch comes from

Each row is one pitch: the diameter where it first appears as coarse, then the larger diameters that borrow it back for a fine thread. The reach is not one size down — M64 × 4 takes a pitch that was coarse on an M36, 28 mm of extra diameter behind the identical thread.

The count column is worth a second look. A pitch is not reused once — the busiest row carries 6 diameters — which is why 11 distinct pitches cover 43 fine threads.

The exceptions

Fine threadPitch (mm)Coarse at the same diameter (mm)Section gain
M1 × 0.20.20.2512.1%
M1.2 × 0.20.20.259.5%
M1.4 × 0.20.20.316.7%
M1.6 × 0.20.20.3523.3%
M1.8 × 0.20.20.3520.0%

All 5 are the same pitch, 0.2 mm, and it is the one pitch in the whole metric range that belongs to the fine column alone. It has nothing to borrow from: the smallest coarse pitch anywhere is 0.25 mm, already larger, so no smaller diameter ever used 0.2 as coarse. At and below M1.8 the system has to invent a pitch; above it, it recycles.

What the finer pitch actually buys

The gain is real and it is smaller than the usual argument for fine threads suggests. Take the stress section ISO 898-1 works from, As = π/4 × ((d2 + d3) / 2)², and compute it for both threads at the same diameter. Across the 43 pairs here the fine thread carries 3.2% to 23.3% more stress area, with a median of 8.8%.

Fine threadCoarse (mm)Fine (mm)As coarse (mm²)As fine (mm²)Gain
M1 × 0.20.250.20.460.5212.1%
M1.2 × 0.20.250.20.730.809.5%
M1.4 × 0.20.30.20.991.1516.7%
M1.6 × 0.20.350.21.271.5623.3%
M1.8 × 0.20.350.21.702.0420.0%
M2 × 0.250.40.252.072.4518.0%
M2.5 × 0.350.450.353.403.708.8%
M3 × 0.350.50.355.055.6010.9%
M3.5 × 0.350.60.356.777.8916.7%
M4 × 0.50.70.58.799.8111.7%
M4.5 × 0.50.750.511.3112.7913.0%
M5 × 0.50.80.514.1916.1513.9%
M6 × 0.7510.7520.1122.029.5%
M7 × 0.7510.7528.8431.127.9%
M8 × 11.25136.6439.156.8%
M8 × 0.751.250.7536.6441.8014.1%
M9 × 11.25148.1551.026.0%
M10 × 1.251.51.2558.0261.245.5%
M10 × 11.5158.0264.4711.1%
M11 × 11.5172.3179.499.9%
M12 × 1.51.751.584.2288.164.7%
M12 × 1.251.751.2584.2292.129.4%
M14 × 1.521.5115.47124.597.9%
M16 × 1.521.5156.70167.306.8%
M18 × 22.52192.48204.226.1%
M18 × 1.52.51.5192.48216.2912.4%
M20 × 22.52244.81258.025.4%
M20 × 1.52.51.5244.81271.5710.9%
M22 × 22.52303.41318.104.8%
M22 × 1.52.51.5303.41333.139.8%
M24 × 232352.49384.469.1%
M27 × 232459.39495.797.9%
M30 × 23.52560.74621.2610.8%
M33 × 33.53693.73715.603.2%
M36 × 343816.61864.925.9%
M39 × 343975.631,028.365.4%
M42 × 34.531,121.021,205.957.6%
M45 × 34.531,306.121,397.677.0%
M48 × 3531,473.221,603.548.8%
M52 × 4541,757.911,828.084.0%
M56 × 45.542,030.022,143.785.6%
M60 × 45.542,362.032,484.615.2%
M64 × 4642,675.902,850.576.5%

The two ends are worth reading together. The largest gain is M1.6 × 0.2 at 23.3%, where the pitch drops from 0.35 to 0.2 mm on a body of 1.6 mm. The smallest is M33 × 3 at 3.2%: there the fine pitch is 3 mm against a coarse 3.5 mm, a difference of 0.5 mm on a 33 mm diameter.

That is the whole pattern. The gain is driven by the pitch difference divided by the diameter, so the same difference buys less as the body grows. M10 × 1 and M33 × 3 both step down exactly 0.5 mm from their coarse pitch. On the 10 mm body that is worth 11.1%; on the 33 mm body it is worth 3.2%.

What it costs

  • Helix angle. The coarse threads here run from 1.78° to 5.41°, the fine ones from 1.19° to 4.19°. A shallower helix is the actual mechanism behind "fine threads resist loosening" — it is the same thread on a bigger cylinder, so the ramp is gentler.
  • Turns. The same engagement length needs 1.50 times as many turns on the M10 fine thread as on the coarse one, and more on every pair here. Assembly time is the first thing a fine thread spends.
  • Damage. The thread is shallower, so a nick on the crest takes out a larger share of the flank. In a dirty or repeatedly assembled joint this is what fails first, not the section.

How to use this

  1. Read a fine designation as a coarse one. M10 × 1 is an M6 thread on a 10 mm body, so the gauge, the tap and the insert for M6 pitch are the right ones to check against — and the reason a fine bolt never fits a coarse nut of the same diameter.
  2. Do not buy strength with pitch unless the numbers say so. The median gain here is 8.8%; a change of property class moves the same bolt by far more, and the grade article is where that comparison belongs.
  3. If a large fine thread is specified, the section is usually not the reason: at M33 the gain is 3.2%, the smallest in the table. Adjustment, sealing, wall thickness and a standard that only lists fine are the arguments that survive — worth writing down which one applies.

Every ISO metric thread page prints both the pitch diameters and the tap drill, so the section figures above can be recomputed by hand. For what goes wrong when the two series are mixed up in a parts bin, see the pitch article.