METRICfine60° flankISO 262

M3.5 × 0.35 fine Thread Dimensions

M3.5 x 0.35 (fine) is a fine ISO Metric thread. Pitch is 0.35 mm, equivalent to 72.57 threads per inch. The recommended tap drill leaves roughly 75% thread engagement.

Major Ø3.5 mm
Pitch0.35 mm
Threads per inch72.57
Pitch Ø3.27 mm
Tap drill3.15 mm

Thread profile

millimetres unless stated
Thread profile — M3.5 x 0.35 (fine)d 3.5d2 3.27d3 3.07mm60°P 0.35h3 0.215tap ⌀3.15
M3.5 × 0.35 fine — basic profile60° flank angle · Not to scale

Basic information

Designation
M3.5 x 0.35 (fine)
Thread system
ISO Metric
Series
fine
Standard
ISO 262
Basic profile
ISO 68-1 basic profile
Flank angle
60°

Dimensions

Major diameter
3.5 mm
Pitch
0.35 mm
Threads per inch
72.57
Pitch diameter
3.27 mm
Minor diameter (external)
3.07 mm
Minor diameter (internal)
3.12 mm
Thread depth
0.215 mm
Recommended tap drill
Ø 3.15 mm

How these values are derived

computed from the basic profile

These figures follow the ISO 68-1 basic profile of ISO 262. A 60° basic profile uses a fundamental triangle height H = 0.866025 × P, with external minor diameter d₃ = d − 1.226869 × P and internal minor diameter D₁ = d − 1.082532 × P; the two differ because the external root is rounded while the internal crest is truncated. A 55° Whitworth profile uses H = 0.960491 × P and a thread height of 0.640327 × P. The recommended tap drill is given as nominal diameter minus pitch, which approximates 75% thread engagement — adjust it for tough materials or deep holes.

Compatible parts48 specification pages

All M3.5 fasteners

Every fastener below is threaded M3.5 × 0.35 fine, so a nut, bolt or washer picked from this list will mate with it.

DIN 84ISO 1207DIN 85ISO 1580DIN 963ISO 2009
SpecificationLength
DIN 84 M3.5 × 6 Slotted Cheese Head Screw6 mm
DIN 84 M3.5 × 8 Slotted Cheese Head Screw8 mm
DIN 84 M3.5 × 10 Slotted Cheese Head Screw10 mm
DIN 84 M3.5 × 12 Slotted Cheese Head Screw12 mm
DIN 84 M3.5 × 16 Slotted Cheese Head Screw16 mm
DIN 84 M3.5 × 20 Slotted Cheese Head Screw20 mm
DIN 84 M3.5 × 25 Slotted Cheese Head Screw25 mm
DIN 84 M3.5 × 30 Slotted Cheese Head Screw30 mm
ISO 1207 M3.5 × 6 Slotted Cheese Head Screw — Product Grade A6 mm
ISO 1207 M3.5 × 8 Slotted Cheese Head Screw — Product Grade A8 mm
ISO 1207 M3.5 × 10 Slotted Cheese Head Screw — Product Grade A10 mm
ISO 1207 M3.5 × 12 Slotted Cheese Head Screw — Product Grade A12 mm
ISO 1207 M3.5 × 16 Slotted Cheese Head Screw — Product Grade A16 mm
ISO 1207 M3.5 × 20 Slotted Cheese Head Screw — Product Grade A20 mm
ISO 1207 M3.5 × 25 Slotted Cheese Head Screw — Product Grade A25 mm
ISO 1207 M3.5 × 30 Slotted Cheese Head Screw — Product Grade A30 mm
DIN 85 M3.5 × 6 Slotted Pan Head Screw6 mm
DIN 85 M3.5 × 8 Slotted Pan Head Screw8 mm
DIN 85 M3.5 × 10 Slotted Pan Head Screw10 mm
DIN 85 M3.5 × 12 Slotted Pan Head Screw12 mm
DIN 85 M3.5 × 16 Slotted Pan Head Screw16 mm
DIN 85 M3.5 × 20 Slotted Pan Head Screw20 mm
DIN 85 M3.5 × 25 Slotted Pan Head Screw25 mm
DIN 85 M3.5 × 30 Slotted Pan Head Screw30 mm
ISO 1580 M3.5 × 6 Slotted Pan Head Screw — Product Grade A6 mm
ISO 1580 M3.5 × 8 Slotted Pan Head Screw — Product Grade A8 mm
ISO 1580 M3.5 × 10 Slotted Pan Head Screw — Product Grade A10 mm
ISO 1580 M3.5 × 12 Slotted Pan Head Screw — Product Grade A12 mm
ISO 1580 M3.5 × 16 Slotted Pan Head Screw — Product Grade A16 mm
ISO 1580 M3.5 × 20 Slotted Pan Head Screw — Product Grade A20 mm
ISO 1580 M3.5 × 25 Slotted Pan Head Screw — Product Grade A25 mm
ISO 1580 M3.5 × 30 Slotted Pan Head Screw — Product Grade A30 mm
DIN 963 M3.5 × 6 Slotted Countersunk Head Screw6 mm
DIN 963 M3.5 × 8 Slotted Countersunk Head Screw8 mm
DIN 963 M3.5 × 10 Slotted Countersunk Head Screw10 mm
DIN 963 M3.5 × 12 Slotted Countersunk Head Screw12 mm
DIN 963 M3.5 × 16 Slotted Countersunk Head Screw16 mm
DIN 963 M3.5 × 20 Slotted Countersunk Head Screw20 mm
DIN 963 M3.5 × 25 Slotted Countersunk Head Screw25 mm
DIN 963 M3.5 × 30 Slotted Countersunk Head Screw30 mm

Showing the first 40 of 48 specification pages.

Related

Other pitches at the same 3.5 mm diameter — a fine pitch on a coarse diameter, or the reverse, is the usual substitution question.

M3.5 × 0.6

Neighbouring sizes in ISO Metric.

M1.8 × 0.2 fineM2 × 0.25 fineM2.5 × 0.35 fineM3 × 0.35 fineM4 × 0.5 fineM4.5 × 0.5 fineM5 × 0.5 fineM6 × 0.75 fine