M7 × 0.75 fine Thread Dimensions

Basic information

Designation

M7 x 0.75 (fine)

Thread system

ISO Metric

Series

fine

Standard

ISO 262

Basic profile

ISO 68-1 basic profile

Flank angle

60°

Dimensions

Major diameter

7 mm

Pitch

0.75 mm

Threads per inch

33.87

Pitch diameter

6.51 mm

Minor diameter (external)

6.08 mm

Minor diameter (internal)

6.19 mm

Thread depth

0.46 mm

Recommended tap drill

Ø 6.25 mm

These figures follow the ISO 68-1 basic profile of ISO 262. A 60° basic profile uses a fundamental triangle height H = 0.866025 × P, with external minor diameter d₃ = d − 1.226869 × P and internal minor diameter D₁ = d − 1.082532 × P; the two differ because the external root is rounded while the internal crest is truncated. A 55° Whitworth profile uses H = 0.960491 × P and a thread height of 0.640327 × P. The recommended tap drill is given as nominal diameter minus pitch, which approximates 75% thread engagement — adjust it for tough materials or deep holes.

No specification in this database uses M7 × 0.75 fine yet.

Other pitches at the same 7 mm diameter — a fine pitch on a coarse diameter, or the reverse, is the usual substitution question.

Neighbouring sizes in ISO Metric.