WoodTimber7.25 × 7.25 in actual

8x8 Lumber Dimensions

The largest size in this table, and the point at which dressed stock becomes hard to buy — most material this size is specified rough.

8" nom.8" nominal7-1/4" actual7-1/4" actual8x8
8x8 section — nominal vs dressedDashed = nominal 8 × 8 in · solid = actual 7.25 × 7.25 in. Drawn to a single scale.

Quick specificationwhat the size actually measures

Nominal size8 × 8 in (203.2 × 203.2 mm)
Actual size (dry)7.25 × 7.25 in (184.15 × 184.15 mm)
Actual size (green)7.3125 × 7.3125 in (185.74 × 185.74 mm)
Dressed section area52.56 in² (339.11 cm²)
Removed per face0.375 in off the thickness, 0.375 in off the width
Trade groupTimber

Dimensionsnominal against dressed, and why they differ

The nominal figure of 8 × 8 inches describes the rough green board. After drying and planing on four faces the section measures 7.25 by 7.25 inches — that is, 0.375 inch off each of the wide faces and 0.375 inch off each edge.

Every page in this database is generated from the dressed figure, because that is the section that has to carry the load and take the fixing. If you are sizing a beam, checking a fixing length or estimating a delivery, use 7.25 × 7.25 inches (184.15 × 184.15 mm) rather than the nominal call size.

By lengthboard feet, volume and weight for each tabulated length

LengthBoard feetActual volumeWeight (Spruce (Sitka))
8x8x6322.1901 ft³58.79 lb
8x8x842.672.9201 ft³78.39 lb
8x8x1053.333.6502 ft³97.99 lb
8x8x12644.3802 ft³117.58 lb
8x8x1474.675.1102 ft³137.18 lb
8x8x1685.335.8403 ft³156.78 lb

Two different bases, deliberately. Board feet is calculated from the nominal section, because that is the pricing convention. Volume and weight use the actual section, because that is the material actually present. A 2x4x8 is 5.33 board feet but only 2.9201 cubic feet.

Weight by speciesthe same section, every species in the database

Wood database
SpeciesDensity8x8x8 weight
Balsa0.16 g/cm³29.17 lb · 13.23 kg
Cedar (Western Red)0.37 g/cm³67.45 lb · 30.59 kg
Poplar (Yellow)0.42 g/cm³76.57 lb · 34.73 kg
Basswood0.42 g/cm³76.57 lb · 34.73 kg
Redwood0.42 g/cm³76.57 lb · 34.73 kg
Spruce (Sitka)0.43 g/cm³78.39 lb · 35.56 kg
Cedar (Eastern Red)0.47 g/cm³85.68 lb · 38.86 kg
Hemlock (Western)0.47 g/cm³85.68 lb · 38.86 kg
Cypress (Bald)0.48 g/cm³87.5 lb · 39.69 kg
Fir (Douglas)0.53 g/cm³96.62 lb · 43.83 kg
Pine (Southern Yellow)0.55 g/cm³100.26 lb · 45.48 kg
Mahogany (Honduran)0.55 g/cm³100.26 lb · 45.48 kg
Cherry (Black)0.56 g/cm³102.09 lb · 46.31 kg
Larch0.58 g/cm³105.73 lb · 47.96 kg
Teak0.63 g/cm³114.85 lb · 52.1 kg
OSB (Oriented Strand Board)0.65 g/cm³118.49 lb · 53.75 kg
Walnut (Black)0.66 g/cm³120.32 lb · 54.58 kg
Ash (White)0.67 g/cm³122.14 lb · 55.4 kg
Birch Plywood0.68 g/cm³123.96 lb · 56.23 kg
Birch (Yellow Birch)0.69 g/cm³125.79 lb · 57.06 kg
Bamboo0.7 g/cm³127.61 lb · 57.88 kg
Maple (Hard Maple)0.705 g/cm³128.52 lb · 58.3 kg
Beech (American)0.72 g/cm³131.25 lb · 59.53 kg
Oak0.75 g/cm³136.72 lb · 62.02 kg
MDF (Medium Density Fibreboard)0.75 g/cm³136.72 lb · 62.02 kg
Hickory0.82 g/cm³149.48 lb · 67.8 kg
Rosewood (East Indian)0.85 g/cm³154.95 lb · 70.28 kg
Ipe1 g/cm³182.3 lb · 82.69 kg

Weights are derived, not quoted: density at about 12% moisture content × actual volume. Treat them as a floor — green stock stays heavier until it dries.

Where it is usedtypical applications for this section

Heavy postsTimber framesMarine structures

Frequently asked questionsabout 8x8

What are the actual dimensions of a 8x8?

7.25 × 7.25 inches — 184.15 × 184.15 millimetres. The nominal call size of 8 × 8 inches is the rough green section, before planing and drying.

How much does a 8x8 weigh?

That depends on the species and the length, which is why this page gives both rather than one figure. A 8x8x8 of Spruce (Sitka) weighs about 78.39 lb (35.56 kg); the table above covers every species in the database at that length.

Is a green 8x8 the same size?

No — unseasoned stock is dressed to 7.3125 × 7.3125 inches, slightly larger, because it shrinks to the dry size as it seasons. Mixing green and dry material in the same assembly will show a step once the green pieces dry.

How do I convert a 8x8 to board feet?

Multiply the nominal thickness, width and length in inches and divide by 144. For a 8x8x8 that is (8 × 8 × 96) ÷ 144 = 42.67 board feet.

Other lumber sizesevery nominal size in the database

Lumber size database