Metric40 standards230 specification pages

M10 Fasteners

Every M10 screw, bolt, anchor bolt, nut and washer in the database. M10 has a nominal major diameter of 10 mm with a standard coarse pitch of 1.5 mm, across 40 standards. Rivets are not on this page: they carry no thread, so they are indexed by shank diameter rather than by size designation.

Nominal Ø10 mm
Coarse pitch1.5 mm
Pitch Ø9.03 mm
Tap drill8.5 mm

M10 thread dimensions

Full thread page
Designation
M10 × 1.5
Major diameter
10 mm
Pitch
1.5 mm
Pitch diameter
9.03 mm
Minor diameter — external
8.16 mm
Minor diameter — internal
8.38 mm
Tap drill size
Ø 8.5 mm

M10 Screws

172 pages

M10 Bolts

42 pages

M10 Nuts

8 pages
DIN 934Hexagon Full Nut
ISO 4032Hexagon Regular Nut, Style 1
DIN 439Hexagon Thin Nut (Jam Nut)
ISO 4035Hexagon Thin Nut, Chamfered
DIN 985Prevailing Torque Hexagon Nut with Nylon Insert
ISO 10511Prevailing Torque Hexagon Nut with Non-Metallic Insert
ISO 4161Hexagon Flange Nut
DIN 6923Hexagon Flange Nut

M10 Washers

3 pages
ISO 7089Flat Washer — Normal Series, 200 HV
DIN 125 AFlat Washer — Normal Series, 140 HV
DIN 127Spring Lock Washer — Square Section

M10 anchor-bolts

5 pages
DIN 529 AAnchor Bolt, Form A
DIN 529 BAnchor Bolt, Form B
DIN 529 CAnchor Bolt, Form C
DIN 529 EAnchor Bolt, Form E
DIN 529 FAnchor Bolt, Form F

Browse other sizes