Metric34 standards176 specification pages

M12 Fasteners

Every M12 screw, bolt, anchor bolt, nut and washer in the database. M12 has a nominal major diameter of 12 mm with a standard coarse pitch of 1.75 mm, across 34 standards. Rivets are not on this page: they carry no thread, so they are indexed by shank diameter rather than by size designation.

Nominal Ø12 mm
Coarse pitch1.75 mm
Pitch Ø10.86 mm
Tap drill10.25 mm

M12 thread dimensions

Full thread page
Designation
M12 × 1.75
Major diameter
12 mm
Pitch
1.75 mm
Pitch diameter
10.86 mm
Minor diameter — external
9.85 mm
Minor diameter — internal
10.11 mm
Tap drill size
Ø 10.25 mm

M12 Screws

118 pages

M12 Bolts

42 pages

M12 Nuts

8 pages
DIN 934Hexagon Full Nut
ISO 4032Hexagon Regular Nut, Style 1
DIN 439Hexagon Thin Nut (Jam Nut)
ISO 4035Hexagon Thin Nut, Chamfered
DIN 985Prevailing Torque Hexagon Nut with Nylon Insert
ISO 10511Prevailing Torque Hexagon Nut with Non-Metallic Insert
ISO 4161Hexagon Flange Nut
DIN 6923Hexagon Flange Nut

M12 Washers

3 pages
ISO 7089Flat Washer — Normal Series, 200 HV
DIN 125 AFlat Washer — Normal Series, 140 HV
DIN 127Spring Lock Washer — Square Section

M12 anchor-bolts

5 pages
DIN 529 AAnchor Bolt, Form A
DIN 529 BAnchor Bolt, Form B
DIN 529 CAnchor Bolt, Form C
DIN 529 EAnchor Bolt, Form E
DIN 529 FAnchor Bolt, Form F

Browse other sizes