Metric24 standards82 specification pages

M20 Fasteners

Every M20 screw, bolt, anchor bolt, nut and washer in the database. M20 has a nominal major diameter of 20 mm with a standard coarse pitch of 2.5 mm, across 24 standards. Rivets are not on this page: they carry no thread, so they are indexed by shank diameter rather than by size designation.

Nominal Ø20 mm
Coarse pitch2.5 mm
Pitch Ø18.38 mm
Tap drill17.5 mm

M20 thread dimensions

Full thread page
Designation
M20 × 2.5
Major diameter
20 mm
Pitch
2.5 mm
Pitch diameter
18.38 mm
Minor diameter — external
16.93 mm
Minor diameter — internal
17.29 mm
Tap drill size
Ø 17.5 mm

M20 Screws

28 pages

M20 Bolts

38 pages

M20 Nuts

8 pages
DIN 934Hexagon Full Nut
ISO 4032Hexagon Regular Nut, Style 1
DIN 439Hexagon Thin Nut (Jam Nut)
ISO 4035Hexagon Thin Nut, Chamfered
DIN 985Prevailing Torque Hexagon Nut with Nylon Insert
ISO 10511Prevailing Torque Hexagon Nut with Non-Metallic Insert
ISO 4161Hexagon Flange Nut
DIN 6923Hexagon Flange Nut

M20 Washers

3 pages
ISO 7089Flat Washer — Normal Series, 200 HV
DIN 125 AFlat Washer — Normal Series, 140 HV
DIN 127Spring Lock Washer — Square Section

M20 anchor-bolts

5 pages
DIN 529 AAnchor Bolt, Form A
DIN 529 BAnchor Bolt, Form B
DIN 529 CAnchor Bolt, Form C
DIN 529 EAnchor Bolt, Form E
DIN 529 FAnchor Bolt, Form F

Browse other sizes