ISO 4017 Hexagon Head Screw — Full Thread, Product Grade A/B
ISO version of the full thread hexagon head screw. Head dimensions are dimensionally compatible with DIN 933 for the same nominal size.
Where it is used
ISO 4017 is the ISO designation for the fully threaded hexagon head screw. Product grade A applies up to M24 and grade B above, the division being the tightness of dimensional tolerances rather than strength.
How to choose it
The A and B grades are often mistaken for strength grades, but they only affect dimensional accuracy: grade A has tighter tolerances and suits machined mating parts, while grade B is looser and cheaper, which is fine for general steelwork. Property class still has to be specified separately, most often 8.8 or 10.9.
Dimensions12 sizes · millimetres
| Thread d | Pitch P (mm) | Width across flats s (mm) | Width across corners e (mm) | Head height k (mm) |
|---|---|---|---|---|
| M4 | 0.7 | 7 | 7.66 | 2.8 |
| M5 | 0.8 | 8 | 8.79 | 3.5 |
| M6 | 1 | 10 | 11.05 | 4 |
| M8 | 1.25 | 13 | 14.38 | 5.3 |
| M10 | 1.5 | 16 | 17.77 | 6.4 |
| M12 | 1.75 | 18 | 20.03 | 7.5 |
| M14 | 2 | 21 | 23.35 | 8.8 |
| M16 | 2 | 24 | 26.75 | 10 |
| M18 | 2.5 | 27 | 30.14 | 11.5 |
| M20 | 2.5 | 30 | 33.53 | 12.5 |
| M22 | 2.5 | 34 | 37.72 | 14 |
| M24 | 3 | 36 | 39.98 | 15 |
Nominal dimensions in millimetres as published in ISO 4017. Tolerances, material requirements and marking are defined separately by the issuing body.
Available sizeslinked to individual specification pages
Thread referencesused by the sizes above
Fitting and interchange notes
Interchangeable with DIN 933, though the marking differs — ISO 4017 requires both the property class and the manufacturer's mark on the head. In the EU the current formal designation is EN ISO 4017; on older drawings ISO 4017 refers to the same standard.