DINnuts

DIN 934 Hexagon Full Nut

The default metric hex nut. Height is roughly 0.8 times the nominal diameter, which is what defines a 'full' nut as opposed to the thin DIN 439 jam nut.

Dimensioned drawing — DIN 934 M10s 16m 8.4
DIN 934 M10 — Hexagon full nutNominal dimensions in mm · Not to scale

Where it is used

DIN 934 is the standard full hexagon nut, paired with hexagon head bolts or socket head screws. Nut height is about 0.8 times the nominal diameter, which provides enough thread engagement for the bolt to yield before the nut fails.

How to choose it

Common classes are 6, 8, 10 and 12, and the number maps the nut's proof load to the bolt property class: a class 8 nut goes with a class 8.8 bolt, class 10 with 10.9. Stainless nuts are marked A2-70 and A4-70/80. Mismatching the classes lets the thread strip before the bolt yields, which removes the overload protection the joint was designed around.

Dimensions15 sizes · millimetres

Thread dPitch P (mm)Width across flats s (mm)Width across corners e (mm)Nut height m (mm)
M20.444.621.6
M2.50.4555.452
M30.55.56.012.4
M40.777.663.2
M50.888.794.7
M611011.055.2
M81.251314.386.8
M101.51617.778.4
M121.751820.0310.8
M1422123.3512.8
M1622426.7514.8
M182.52729.5615.8
M202.53032.9518
M222.53437.2919.4
M2433639.5521.5

Nominal dimensions in millimetres as published in DIN 934. Tolerances, material requirements and marking are defined separately by the issuing body.

Available sizeslinked to individual specification pages

Thread referencesused by the sizes above

Fitting and interchange notes

Dimensionally interchangeable with ISO 4032. The three dimensions that matter are nominal thread diameter, width across flats s and nut height m, with s setting the wrench size. The same nominal diameter can have different s values between standards — flange nuts are wider — so verify s when changing supplier.

Specified in these projectsbuilds that call for this standard by name

All projects