ISO 4161 Hexagon Flange Nut
A hex nut with a wide circular flange that spreads the clamping load and behaves like an integrated washer. Speeds up assembly versus nut + washer.
Where it is used
ISO 4161 is the hexagon flange nut, with a wide flange formed into the base that bears directly on the workpiece and does away with a washer. It is used on thin sheet, pressings and anywhere the bearing pressure has to be spread.
How to choose it
The flange contact area is larger than a plain washer at the same size, which prevents crushing on soft materials. Common classes are 8 and 10. As with a plain nut the flange face comes either serrated or plain: serrations lock better but mark the workpiece.
Dimensions8 sizes · millimetres
| Thread d | Pitch P (mm) | Width across flats s (mm) | Flange diameter dc (mm) | Nut height m (mm) |
|---|---|---|---|---|
| M5 | 0.8 | 8 | 11.8 | 5 |
| M6 | 1 | 10 | 14.2 | 6 |
| M8 | 1.25 | 13 | 17.9 | 8 |
| M10 | 1.5 | 15 | 21.8 | 10 |
| M12 | 1.75 | 16 | 26 | 12 |
| M14 | 2 | 18 | 29.6 | 14 |
| M16 | 2 | 24 | 31.9 | 16 |
| M20 | 2.5 | 30 | 42.8 | 20 |
Nominal dimensions in millimetres as published in ISO 4161. Tolerances, material requirements and marking are defined separately by the issuing body.
Available sizeslinked to individual specification pages
Thread referencesused by the sizes above
Fitting and interchange notes
Dimensionally interchangeable with DIN 6923, the two usually being treated as the same product. Because the flange is the washer, do not add one — stacking a washer removes the load-spreading function and changes the friction coefficient the tightening torque was based on.