ISO 4032 Hexagon Regular Nut, Style 1
ISO equivalent of DIN 934. In practice these two are treated as interchangeable in purchasing for the common stock range.
Where it is used
ISO 4032 is the style 1 hexagon nut, corresponding to DIN 934, for general connections from M5 to M39.
How to choose it
The class pairing follows DIN 934: class 8 with 8.8, class 10 with 10.9. Above M10 the nut height of ISO 4032 is slightly greater than DIN 934, and there can be small differences in width across flats and the wrench clearance needed.
Dimensions15 sizes · millimetres
| Thread d | Pitch P (mm) | Width across flats s (mm) | Width across corners e (mm) | Nut height m (mm) |
|---|---|---|---|---|
| M2 | 0.4 | 4 | 4.62 | 1.6 |
| M2.5 | 0.45 | 5 | 5.45 | 2 |
| M3 | 0.5 | 5.5 | 6.01 | 2.4 |
| M4 | 0.7 | 7 | 7.66 | 3.2 |
| M5 | 0.8 | 8 | 8.79 | 4.7 |
| M6 | 1 | 10 | 11.05 | 5.2 |
| M8 | 1.25 | 13 | 14.38 | 6.8 |
| M10 | 1.5 | 16 | 17.77 | 8.4 |
| M12 | 1.75 | 18 | 20.03 | 10.8 |
| M14 | 2 | 21 | 23.35 | 12.8 |
| M16 | 2 | 24 | 26.75 | 14.8 |
| M18 | 2.5 | 27 | 29.56 | 15.8 |
| M20 | 2.5 | 30 | 32.95 | 18 |
| M22 | 2.5 | 34 | 37.29 | 19.4 |
| M24 | 3 | 36 | 39.55 | 21.5 |
Nominal dimensions in millimetres as published in ISO 4032. Tolerances, material requirements and marking are defined separately by the issuing body.
Available sizeslinked to individual specification pages
Thread referencesused by the sizes above
Fitting and interchange notes
Interchangeable with DIN 934, but the chamfer requirement differs slightly. ISO 4032 specifies chamfers at both ends, whereas some low-cost DIN 934 product is chamfered at one end only. That does not affect function if the chamfered end faces out, but it does mean mixed batches look inconsistent.