stainless-steel-a2ISO 3506

A2-80 Stainless (304)

Higher strength stainless, typically available in smaller diameters only.

Tensile Rm800 MPa
Yield Rp0.2600 MPa
Hardness—
Nut classA2-80

Mechanical properties

Property class
A2-80 Stainless (304)
Defined in
ISO 3506
Tensile strength Rm (min)
800 MPa
Yield strength Rp0.2 (min)
600 MPa
Hardness
—
Matching nut class
A2-80

Where this grade is used

The grade is stamped on the head of bolts and screws of M5 and larger as steel grade plus class, so an A2-80 bolt is marked A2-80. An A2-80 Stainless (304) fastener is specified where the joint needs a 0.2 % proof strength of about 600 MPa or less. Always pair it with a nut of ISO 3506-2 class A2-80 or higher, so the bolt fails before the thread strips.

Other classes in ISO 3506