DIN 7984 Hexagon Socket Head Cap Screw with Low Head
Same cylindrical hex socket head as DIN 912 but with roughly half the head height, for assemblies with limited vertical clearance. Lower head means lower permissible preload than a standard DIN 912 of the same size.
Where it is used
DIN 7984 keeps the cylindrical head and hex socket of DIN 912 but cuts the head height to about half, for positions where axial space is limited and a countersink cannot be machined.
How to choose it
The lower head costs both bearing area and socket depth. At the same size the socket in DIN 7984 is shallower than in DIN 912, so the risk of rounding it goes up — use a good-quality hex key. Common classes are 8.8 and 10.9.
Dimensions8 sizes · millimetres
| Thread d | Pitch P (mm) | Head diameter dk (mm) | Head height k (max) (mm) | Socket size s (mm) |
|---|---|---|---|---|
| M3 | 0.5 | 5.5 | 2 | 2 |
| M4 | 0.7 | 7 | 2.8 | 2.5 |
| M5 | 0.8 | 8.5 | 3.5 | 3 |
| M6 | 1 | 10 | 4 | 4 |
| M8 | 1.25 | 13 | 5 | 5 |
| M10 | 1.5 | 16 | 6.5 | 6 |
| M12 | 1.75 | 18 | 7 | 8 |
| M16 | 2 | 24 | 9 | 10 |
Nominal dimensions in millimetres as published in DIN 7984. Tolerances, material requirements and marking are defined separately by the issuing body.
Available sizeslinked to individual specification pages
Thread referencesused by the sizes above
Fitting and interchange notes
There is no directly corresponding ISO standard, which sets it apart from most DIN fasteners. If an ISO number is mandatory the only options are ISO 7380 (button head) or ISO 4762 (standard head), and neither has the same profile, so neither is a drop-in replacement. Where a drawing relies on the low-head clearance, say so explicitly to the supplier.