ISO 7380 Hexagon Socket Button Head Screw
A low dome head with internal hex drive. Chosen when you want a finished look without machining a countersink.
Where it is used
ISO 7380 is the button head socket screw. The low domed head gives a clean appearance without needing a countersink, which is why it turns up on consumer electronics, furniture hardware and enclosures with exposed fasteners.
How to choose it
Head height is roughly half that of a same-size cylindrical head, so the bearing area and head strength are both lower — it suits shear or light tensile duty only. Common classes are 8.8 and 10.9, with A2-70 in stainless. The shallow head also limits how deep the key engages, so reduce tightening torque to avoid rounding the socket.
Dimensions8 sizes · millimetres
| Thread d | Pitch P (mm) | Head diameter dk (mm) | Head height k (mm) | Socket size s (mm) |
|---|---|---|---|---|
| M3 | 0.5 | 5.7 | 1.65 | 2 |
| M4 | 0.7 | 7.6 | 2.2 | 2.5 |
| M5 | 0.8 | 9.5 | 2.75 | 3 |
| M6 | 1 | 10.5 | 3.3 | 4 |
| M8 | 1.25 | 14 | 4.4 | 5 |
| M10 | 1.5 | 17.5 | 5.5 | 6 |
| M12 | 1.75 | 21 | 6.6 | 8 |
| M16 | 2 | 28 | 8.8 | 10 |
Nominal dimensions in millimetres as published in ISO 7380. Tolerances, material requirements and marking are defined separately by the issuing body.
Available sizeslinked to individual specification pages
Thread referencesused by the sizes above
Fitting and interchange notes
The standard is published in two parts, ISO 7380-1 (plain button head) and ISO 7380-2 (button head with flange), so state which one is wanted when ordering. The flanged version adds bearing area and is much less likely to crush thin sheet or plastic.