ISO 4762 Hexagon Socket Head Cap Screw
The ISO version of the metric socket head cap screw. Dimensionally very close to DIN 912, with small differences in nominal head height across some sizes.
Where it is used
ISO 4762 is the ISO counterpart to DIN 912 and is now the number more often quoted in international procurement. Most machine builders outside Europe call it up directly on drawings, and China's GB/T 70.1 uses the same dimensional system, so the three are commonly treated as one product.
How to choose it
The property class system matches DIN 912: 8.8, 10.9 and 12.9. Where corrosion resistance is needed, A2-70, A4-70 and A4-80 to ISO 3506-1 are the stainless alternatives at the same size. Note that stainless strength is quoted as tensile strength — 70 and 80 mean 700 MPa and 800 MPa, well below the 1220 MPa of class 12.9, so stainless is never an equal-strength substitution.
Dimensions15 sizes · millimetres
| Thread d | Pitch P (mm) | Head diameter dk (mm) | Head height k (mm) | Socket size s (mm) | Thread length b (min) (mm) |
|---|---|---|---|---|---|
| M2 | 0.4 | 3.8 | 2 | 1.5 | 16 |
| M2.5 | 0.45 | 4.5 | 2.5 | 2 | 17 |
| M3 | 0.5 | 5.5 | 3 | 2.5 | 18 |
| M4 | 0.7 | 7 | 4 | 3 | 20 |
| M5 | 0.8 | 8.5 | 5 | 4 | 22 |
| M6 | 1 | 10 | 6 | 5 | 24 |
| M8 | 1.25 | 13 | 8 | 6 | 28 |
| M10 | 1.5 | 16 | 10 | 8 | 32 |
| M12 | 1.75 | 18 | 12 | 10 | 36 |
| M14 | 2 | 21 | 14 | 12 | 40 |
| M16 | 2 | 24 | 16 | 14 | 44 |
| M18 | 2.5 | 27 | 18 | 14 | 48 |
| M20 | 2.5 | 30 | 20 | 17 | 52 |
| M22 | 2.5 | 33 | 22 | 17 | 56 |
| M24 | 3 | 36 | 24 | 19 | 60 |
Nominal dimensions in millimetres as published in ISO 4762. Tolerances, material requirements and marking are defined separately by the issuing body.
Available sizeslinked to individual specification pages
Thread referencesused by the sizes above
Fitting and interchange notes
The differences from DIN 912 lie in how completely the standard text is written rather than in the dimensions: ISO 4762 sets finer tolerances on the bearing face, fillet radius and marking. Where a drawing specifies ISO 4762 and the supplier only stocks DIN 912, the two can normally be released against each other — but for safety-related parts ask the supplier for a dimensional inspection report.