carbon-steelSAE J429

SAE J429 Grade 2

Low carbon steel inch fastener. Head marked with no radial lines.

Tensile Rm414 MPa
Yield Rp0.2393 MPa
HardnessHRB 70–100
Nut grade2

Mechanical properties

Property grade
SAE J429 Grade 2
Defined in
SAE J429
Tensile strength Rm (min)
414 MPa
Yield strength Rp0.2 (min)
393 MPa
Hardness
HRB 70–100
Matching nut grade
2
Material
Carbon Steel

Where this grade is used

The grade is not stamped as a number: it is shown by radial lines on the head. An SAE J429 Grade 2 fastener is specified where the joint needs a 0.2 % proof strength of about 393 MPa or less. Always pair it with a nut of SAE J995 Grade 2 or higher, so the bolt fails before the thread strips.

Other grades in SAE J429