DINscrewsHeadless

DIN 913 Hexagon Socket Set Screw — Flat Point

A flat ended grub screw used where the shaft must not be marked, or for adjustment applications such as levelling screws.

Dimensioned drawing — DIN 913 M8 × 8L 8⌀4⌀8
DIN 913 M8 × 8 — HeadlessNominal dimensions in mm · Not to scale

Where it is used

DIN 913 is the flat point socket set screw, ending in a plain face. It is used where a flat surface is to be pressed or a surface protected, holding the part through friction at the end face.

How to choose it

A flat point holds purely by friction, the weakest of the four point styles, so it suits light load, low vibration, or positioning that is adjusted often. It is often paired with a copper pad to protect a soft shaft surface.

Dimensions8 sizes · millimetres

Thread dPitch P (mm)Socket size s (mm)
M30.51.5
M40.72
M50.82.5
M613
M81.254
M101.55
M121.756
M1628

Nominal dimensions in millimetres as published in DIN 913. Tolerances, material requirements and marking are defined separately by the issuing body.

Available sizeslinked to individual specification pages

Thread referencesused by the sizes above

Fitting and interchange notes

Dimensionally interchangeable with ISO 4026. Pressing a flat point directly onto a shaft gives a small contact patch that slips readily, so in practice a soft pad is added — it raises friction and prevents scoring at the same time.