DINscrewsHeadless

DIN 916 Hexagon Socket Set Screw — Cup Point

A headless grub screw with a cupped end that digs into the shaft. Common for locking collars, pulleys and knobs onto shafts.

Dimensioned drawing — DIN 916 M8 × 8L 8⌀4⌀8
DIN 916 M8 × 8 — HeadlessNominal dimensions in mm · Not to scale

Where it is used

DIN 916 is the cup point socket set screw, with a concave cup at the end. Tightening drives the cup rim into the shaft surface to form a mechanical bite, which is used to fix collars, couplings or handwheels onto a shaft.

How to choose it

Of the four set screw point styles the cup point resists loosening best, at the cost of damaging the shaft, so it is unsuited to anything dismantled often. Hardness grades are 14H, 22H, 33H and 45H, with 45H the common high-strength grade.

Dimensions8 sizes · millimetres

Thread dPitch P (mm)Socket size s (mm)
M30.51.5
M40.72
M50.82.5
M613
M81.254
M101.55
M121.756
M1628

Nominal dimensions in millimetres as published in DIN 916. Tolerances, material requirements and marking are defined separately by the issuing body.

Available sizeslinked to individual specification pages

Thread referencesused by the sizes above

Fitting and interchange notes

Dimensionally interchangeable with ISO 4029. Set screws carry mainly torsion and axial load and should not be used as the primary connection in transverse shear. The cup bites only a limited depth and transmits modest torque; where more torque must be carried, use a key or a taper bush instead.

Specified in these projectsbuilds that call for this standard by name

All projects