ISO 4029 Hexagon Socket Set Screw — Cup Point
ISO equivalent of DIN 916, same cup point geometry and socket sizes.
Where it is used
ISO 4029 is the ISO designation for the cup point set screw, corresponding to DIN 916, used for radial fixing between a shaft and a hub.
How to choose it
Grades are marked 14H, 22H, 33H and 45H, and the higher the number the harder the surface and the better it bites. 45H is the common grade and will bite directly into a hardened and tempered shaft. Stainless versions are normally not case hardened, so they are softer and lock less well.
Dimensions8 sizes · millimetres
| Thread d | Pitch P (mm) | Socket size s (mm) |
|---|---|---|
| M3 | 0.5 | 1.5 |
| M4 | 0.7 | 2 |
| M5 | 0.8 | 2.5 |
| M6 | 1 | 3 |
| M8 | 1.25 | 4 |
| M10 | 1.5 | 5 |
| M12 | 1.75 | 6 |
| M16 | 2 | 8 |
Nominal dimensions in millimetres as published in ISO 4029. Tolerances, material requirements and marking are defined separately by the issuing body.
Available sizeslinked to individual specification pages
Thread referencesused by the sizes above
Fitting and interchange notes
Dimensionally interchangeable with DIN 916. ISO 4029 sets explicit tolerances on the cup diameter and depth, which directly affect how well it bites, so an unbranded part is not a sensible substitute for a set screw made to a stated standard.