DIN 84 Slotted Cheese Head Screw
A cylindrical head with a straight slot drive. Still common in instrument and electrical work, though pozidriv and hexalobular drives have largely replaced it in volume assembly.
Where it is used
DIN 84 is the slotted cheese head screw: a low cylindrical head with a flat top and a single slot. It is used in low-torque small assemblies that are taken apart repeatedly, such as electrical terminals, instrument panels and furniture hardware.
How to choose it
A single slot transmits far less torque than a cross recess or a hex socket, so it suits small sizes and low strength requirements only. Common sizes run M1.6 to M10, mostly in class 4.8 steel or stainless. The low head means it cannot take significant axial load.
Dimensions9 sizes · millimetres
| Thread d | Pitch P (mm) | Head diameter dk (mm) | Head height k (mm) |
|---|---|---|---|
| M2 | 0.4 | 3.8 | 1.3 |
| M2.5 | 0.45 | 4.5 | 1.6 |
| M3 | 0.5 | 5.5 | 1.9 |
| M3.5 | 0.6 | 6 | 2.1 |
| M4 | 0.7 | 7 | 2.4 |
| M5 | 0.8 | 8.5 | 3 |
| M6 | 1 | 10 | 3.6 |
| M8 | 1.25 | 13 | 4.8 |
| M10 | 1.5 | 16 | 6 |
Nominal dimensions in millimetres as published in DIN 84. Tolerances, material requirements and marking are defined separately by the issuing body.
Available sizeslinked to individual specification pages
Thread referencesused by the sizes above
Fitting and interchange notes
Dimensionally interchangeable with ISO 1207. A slotted screw is easy to cam out of the slot with a screwdriver; for volume assembly a cross recess version is better, and the slotted type is best left to work needing visual alignment or occasional adjustment.