DIN 7984Low socket headHexagon socket
DIN 7984 M5 × 10 Low socket head
DIN 7984 M5 × 10 is a low head socket cap screw with a 10 mm nominal length, on a M5 × 0.8 mm metric thread. Same cylindrical hex socket head as DIN 912 but with roughly half the head height, for assemblies with limited vertical clearance. Lower head means lower permissible preload than a standard DIN 912 of the same size.
Diameter5 mm
Length10 mm
Pitch0.8 mm
Socket size s3 mm
Head Ø dk8.5 mm
HeadLow socket head
DriveHexagon socket
Dimensions
- Standard
- DIN 7984
- Type
- Low head socket cap screw
- Size
- M5 × 10
- Thread
- M5 × 0.8
- Length L
- 10 mm
- Socket size s
- 3 mm
- Head diameter dk
- 8.5 mm
- Head height k
- 3.5 mm
- Drive
- Hexagon socket
- Head
- Low socket head
Nominal values in millimetres as published in DIN 7984. Estimated weight 3.1 g per piece in steel (3.12 g in stainless), calculated from the nominal geometry — real parts vary with tolerance and head chamfers.
Thread data
Full M5 thread pageDesignationM5 × 0.8
Pitch0.8 mm
Major Ø5 mm
Pitch Ø4.48 mm
Minor Ø ext4.02 mm
Tap drillØ 4.2 mm