ISO 10642Countersunk head (90°)Hexagon socket
ISO 10642 M18 × 35 Countersunk head (90°)
ISO 10642 M18 × 35 is a socket countersunk head screw with a 35 mm nominal length, on a M18 × 1.5 mm metric thread. ISO equivalent of DIN 7991. Both use the same 90° countersink angle, so mating holes are interchangeable.
Diameter18 mm
Length35 mm
Pitch1.5 mm
Socket size s14 mm
Head Ø dk33 mm
HeadCountersunk head (90°)
DriveHexagon socket
Dimensions
- Standard
- ISO 10642
- Type
- Socket countersunk head screw
- Size
- M18 × 35
- Thread
- M18 × 1.5
- Length L
- 35 mm
- Socket size s
- 14 mm
- Head diameter dk
- 33 mm
- Head height k
- 10.2 mm
- Thread length b
- 48 mm
- Drive
- Hexagon socket
- Head
- Countersunk head (90°)
Nominal values in millimetres as published in ISO 10642. Estimated weight 111.987 g per piece in steel (112.7 g in stainless), calculated from the nominal geometry — real parts vary with tolerance and head chamfers.
Thread data
Full M18 thread pageDesignationM18 × 1.5 fine
Pitch1.5 mm
Major Ø18 mm
Pitch Ø17.03 mm
Minor Ø ext16.16 mm
Tap drillØ 16.5 mm
Other lengthsISO 10642 M18
All M18 specificationsInterchangeability
ISO 10642 is catalogued with DIN 7991 as its equivalent designation. Dimensions are compared field by field rather than assumed identical.