DIN 571Hexagon headExternal hexagon

DIN 571 8 × 35 Hexagon head

DIN 571 8 × 35 is a hexagon head wood screw with a 35 mm nominal length, 8 mm wood thread. A hexagon head screw with a coarse wood thread and a tapered point, driven into timber without a nut. The head takes a spanner, so it can be pulled down far harder than a slotted wood screw, which is why this is the pattern used for structural timber connections — pergolas, deck framing, sleeper walls and the like. It is not a bolt: there is no machine thread and nothing to thread a nut onto. Nominal diameters run from 4 to 20 mm and the standard prints a mass for every length it makes, so the length lists on these pages differ from diameter to diameter rather than running as one block.

Dimensioned drawing — DIN 571 8 × 35s 13k 5.5⌀ds 8l 35
DIN 571 8 × 35 — Hexagon headNominal dimensions in mm · Not to scale
Diameter8 mm
Length35 mm
Socket size s13 mm
Head height k5.5 mm
HeadHexagon head
DriveExternal hexagon

Dimensions

Standard
DIN 571
Type
Hexagon head wood screw
Size
8 × 35
Diameter
8
Length L
35 mm
Shank diameter ds max.
8 mm
Width across flats s
13 mm
Width across corners e min.
14.2 mm
Head height k
5.5 mm
Drive
External hexagon
Head
Hexagon head

Nominal values in millimetres as published in DIN 571. Mass 14.2 g per piece in steel (14.29 g in stainless), taken from the DIN 571 table — kilograms per 1,000 pieces at 7.85 kg/dm³.

Other lengthsDIN 571 8

All wood-screw diameters

Choosing and fitting this size

DIN 571 8 × 35 is a hexagon head with a 8 mm wood thread, 35 mm long from the bearing face of the head to the point. There is no mating nut: the thread cuts its own way into the timber, and the wood it displaces is what holds it. Whether a pilot hole is needed is decided by the species and the moisture content, not by this standard — dense hardwoods split without one, softwoods usually do not. The core diameter, not the 8 mm outside diameter, is what the pilot hole has to clear.

Wood screws are supplied in steel at 4.6 or 8.8 and in A2 or A4 stainless — 10.9 and 12.9 are not stock grades for this form. The class describes the wire rather than a clamping force: nothing here is preloaded, so what it buys you is torque resistance while driving. A 4.6 screw shears its head off in dense hardwood at a torque an 8.8 screw takes without complaint, which is the failure that actually happens in practice.