DIN 571 8 × 65 Hexagon head
DIN 571 8 × 65 is a hexagon head wood screw with a 65 mm nominal length, 8 mm wood thread. A hexagon head screw with a coarse wood thread and a tapered point, driven into timber without a nut. The head takes a spanner, so it can be pulled down far harder than a slotted wood screw, which is why this is the pattern used for structural timber connections — pergolas, deck framing, sleeper walls and the like. It is not a bolt: there is no machine thread and nothing to thread a nut onto. Nominal diameters run from 4 to 20 mm and the standard prints a mass for every length it makes, so the length lists on these pages differ from diameter to diameter rather than running as one block.
Dimensions
- Standard
- DIN 571
- Type
- Hexagon head wood screw
- Size
- 8 × 65
- Diameter
- 8
- Length L
- 65 mm
- Shank diameter ds max.
- 8 mm
- Width across flats s
- 13 mm
- Width across corners e min.
- 14.2 mm
- Head height k
- 5.5 mm
- Drive
- External hexagon
- Head
- Hexagon head
Nominal values in millimetres as published in DIN 571. Mass 22.2 g per piece in steel (22.34 g in stainless), taken from the DIN 571 table — kilograms per 1,000 pieces at 7.85 kg/dm³.
Other lengthsDIN 571 8
All wood-screw diametersChoosing and fitting this size
DIN 571 8 × 65 is a hexagon head with a 8 mm wood thread, 65 mm long from the bearing face of the head to the point. There is no mating nut: the thread cuts its own way into the timber, and the wood it displaces is what holds it. Whether a pilot hole is needed is decided by the species and the moisture content, not by this standard — dense hardwoods split without one, softwoods usually do not. The core diameter, not the 8 mm outside diameter, is what the pilot hole has to clear.
Wood screws are supplied in steel at 4.6 or 8.8 and in A2 or A4 stainless — 10.9 and 12.9 are not stock grades for this form. The class describes the wire rather than a clamping force: nothing here is preloaded, so what it buys you is torque resistance while driving. A 4.6 screw shears its head off in dense hardwood at a torque an 8.8 screw takes without complaint, which is the failure that actually happens in practice.