ISOscrewsCountersunk head (90°)
ISO 2009 Slotted Countersunk Head Screw — Product Grade A
ISO equivalent of DIN 963, same 90° countersink.
Where it is used
ISO 2009 is the ISO designation for the slotted countersunk head screw, used in light assembly that needs a flush surface.
How to choose it
Product grade A, sizes M1.6 to M10, mostly property class 4.8. Like DIN 963 it uses a 90° countersink angle, so one countersink takes either screw.
Dimensions9 sizes · millimetres
| Thread d | Pitch P (mm) | Head diameter dk (mm) | Head height k (mm) |
|---|---|---|---|
| M2 | 0.4 | 3.8 | 1.2 |
| M2.5 | 0.45 | 4.7 | 1.5 |
| M3 | 0.5 | 5.6 | 1.65 |
| M3.5 | 0.6 | 6.5 | 1.93 |
| M4 | 0.7 | 7.5 | 2.2 |
| M5 | 0.8 | 9.2 | 2.5 |
| M6 | 1 | 11 | 3 |
| M8 | 1.25 | 14.5 | 4 |
| M10 | 1.5 | 18 | 5 |
Nominal dimensions in millimetres as published in ISO 2009. Tolerances, material requirements and marking are defined separately by the issuing body.
Available sizeslinked to individual specification pages
Thread referencesused by the sizes above
Fitting and interchange notes
Dimensionally interchangeable with DIN 963. Because ISO 2009 is aimed at precise small assembly, its countersink angle tolerance is tighter than a general-purpose standard, which gives more consistent seating on automated assembly lines.