DIN 85Pan headSlotted
DIN 85 M10 × 50 Pan head
DIN 85 M10 × 50 is a pan head screw with a 50 mm nominal length, on a M10 × 1.25 mm metric thread. A slightly domed head with straight slot drive. Larger bearing face than a cheese head, useful on thin sheet.
Diameter10 mm
Length50 mm
Pitch1.25 mm
Head Ø dk20 mm
Head height k6 mm
HeadPan head
DriveSlotted
Dimensions
- Standard
- DIN 85
- Type
- Pan head screw
- Size
- M10 × 50
- Thread
- M10 × 1.25
- Length L
- 50 mm
- Head diameter dk
- 20 mm
- Head height k
- 6 mm
- Drive
- Slotted
- Head
- Pan head
Nominal values in millimetres as published in DIN 85. Estimated weight 45.624 g per piece in steel (45.914 g in stainless), calculated from the nominal geometry — real parts vary with tolerance and head chamfers.
Thread data
Full M10 thread pageDesignationM10 × 1.25 fine
Pitch1.25 mm
Major Ø10 mm
Pitch Ø9.19 mm
Minor Ø ext8.47 mm
Tap drillØ 8.75 mm
Other lengthsDIN 85 M10
All M10 specificationsInterchangeability
DIN 85 is catalogued with ISO 1580 as its equivalent designation. Dimensions are compared field by field rather than assumed identical.