DIN 914HeadlessHexagon socket
DIN 914 M10 × 25 Headless
DIN 914 M10 × 25 is a socket set screw, cone point with a 25 mm nominal length, on a M10 × 1.25 mm metric thread. A conical point that seats into a mating centre hole. It gives positive location rather than just friction, so the part can be removed and refitted in exactly the same place.
Diameter10 mm
Length25 mm
Pitch1.25 mm
Socket size s5 mm
HeadHeadless
DriveHexagon socket
Dimensions
- Standard
- DIN 914
- Type
- Socket set screw, cone point
- Size
- M10 × 25
- Thread
- M10 × 1.25
- Length L
- 25 mm
- Socket size s
- 5 mm
- Drive
- Hexagon socket
- Head
- Headless
Nominal values in millimetres as published in DIN 914. Estimated weight 15.413 g per piece in steel (15.512 g in stainless), calculated from the nominal geometry — real parts vary with tolerance and head chamfers.
Thread data
Full M10 thread pageDesignationM10 × 1.25 fine
Pitch1.25 mm
Major Ø10 mm
Pitch Ø9.19 mm
Minor Ø ext8.47 mm
Tap drillØ 8.75 mm