DIN 916HeadlessHexagon socket
DIN 916 M8 × 25 Headless
DIN 916 M8 × 25 is a socket set screw, cup point with a 25 mm nominal length, on a M8 × 1 mm metric thread. A headless grub screw with a cupped end that digs into the shaft. Common for locking collars, pulleys and knobs onto shafts.
Diameter8 mm
Length25 mm
Pitch1 mm
Socket size s4 mm
HeadHeadless
DriveHexagon socket
Dimensions
- Standard
- DIN 916
- Type
- Socket set screw, cup point
- Size
- M8 × 25
- Thread
- M8 × 1
- Length L
- 25 mm
- Socket size s
- 4 mm
- Drive
- Hexagon socket
- Head
- Headless
Nominal values in millimetres as published in DIN 916. Estimated weight 9.865 g per piece in steel (9.927 g in stainless), calculated from the nominal geometry — real parts vary with tolerance and head chamfers.
Thread data
Full M8 thread pageDesignationM8 × 1 fine
Pitch1 mm
Major Ø8 mm
Pitch Ø7.35 mm
Minor Ø ext6.77 mm
Tap drillØ 7 mm
Other lengthsDIN 916 M8
All M8 specificationsInterchangeability
DIN 916 is catalogued with ISO 4029 as its equivalent designation. Dimensions are compared field by field rather than assumed identical.