ISO 10642Countersunk head (90°)Hexagon socket
ISO 10642 M12 × 25 Countersunk head (90°)
ISO 10642 M12 × 25 is a socket countersunk head screw with a 25 mm nominal length, on a M12 × 1.5 mm metric thread. ISO equivalent of DIN 7991. Both use the same 90° countersink angle, so mating holes are interchangeable.
Diameter12 mm
Length25 mm
Pitch1.5 mm
Socket size s8 mm
Head Ø dk24 mm
HeadCountersunk head (90°)
DriveHexagon socket
Dimensions
- Standard
- ISO 10642
- Type
- Socket countersunk head screw
- Size
- M12 × 25
- Thread
- M12 × 1.5
- Length L
- 25 mm
- Socket size s
- 8 mm
- Head diameter dk
- 24 mm
- Head height k
- 7.44 mm
- Thread length b
- 36 mm
- Drive
- Hexagon socket
- Head
- Countersunk head (90°)
Nominal values in millimetres as published in ISO 10642. Estimated weight 37.608 g per piece in steel (37.847 g in stainless), calculated from the nominal geometry — real parts vary with tolerance and head chamfers.
Thread data
Full M12 thread pageDesignationM12 × 1.5 fine
Pitch1.5 mm
Major Ø12 mm
Pitch Ø11.03 mm
Minor Ø ext10.16 mm
Tap drillØ 10.5 mm
Other lengthsISO 10642 M12
All M12 specificationsInterchangeability
ISO 10642 is catalogued with DIN 7991 as its equivalent designation. Dimensions are compared field by field rather than assumed identical.