ISO 4032 M5 Hexagon nut
ISO 4032 M5 is a hexagon nut, on a M5 × 0.8 mm metric thread. ISO equivalent of DIN 934. In practice these two are treated as interchangeable in purchasing for the common stock range.
Dimensions
- Standard
- ISO 4032
- Type
- Hexagon nut
- Size
- M5
- Thread
- M5 × 0.8
- Socket size s
- 8 mm
- Height m
- 4.7 mm
- Drive
- External hexagon
Nominal values in millimetres as published in ISO 4032. Estimated weight 0.809 g per piece in steel (0.814 g in stainless), calculated from the nominal geometry — real parts vary with tolerance and head chamfers.
Thread data
Full M5 thread pageOther lengthsISO 4032 M5
All M5 specificationsInterchangeability
ISO 4032 is catalogued with DIN 934 as its equivalent designation. Dimensions are compared field by field rather than assumed identical.
Choosing and fitting this size
ISO 4032 M5 is a M5 nut, on a 0.8 mm coarse pitch. Mating threads should be a matching class nut in the same property class.
Common stock grades are 8.8, 10.9 and 12.9 in steel, plus A2-70 and A4-80 in stainless. Class 10.9 and 12.9 carry roughly 1.25 and 1.5 times the proof load of 8.8, but they also need a properly rated mating nut — a class 8 nut under a 12.9 bolt simply moves the failure into the thread. Zinc-plated 10.9 and above should be baked to avoid hydrogen embrittlement.
For a tapped hole, M5 × 0.8 mm takes a 4.2 mm tap drill, and the external thread's minor diameter is 4.02 mm — that is the section carrying the load, not the nominal M5 figure. Thread engagement of at least one times the nominal diameter is what lets the bolt fail before the thread strips.