ISO 7089 M20 Flat washer
ISO 7089 M20 is a flat washer, sized for M20 bolts. The general purpose flat washer. It protects the clamped surface, bridges oversized holes and spreads load under the head or nut.
Dimensions
- Standard
- ISO 7089
- Type
- Flat washer
- Size
- M20
- For bolt size
- M20
- Total height h
- 3 mm
- Inside diameter d1
- 21 mm
- Outside diameter d2
- 37 mm
Nominal values in millimetres as published in ISO 7089. Estimated weight 17.164 g per piece in steel (17.274 g in stainless), calculated from the nominal geometry — real parts vary with tolerance and head chamfers.
Other lengthsISO 7089 M20
All M20 specificationsInterchangeability
ISO 7089 is catalogued with DIN 125 A as its equivalent designation. Dimensions are compared field by field rather than assumed identical.
Choosing and fitting this size
ISO 7089 M20 is a washer with a 21 mm inside diameter. It sits under a bolt head or nut to spread the clamping load; the inside diameter matches the bolt it is specified for, so the washer and fastener should always be ordered as a pair.
Hardness is the governing property rather than tensile strength: a 200 HV washer suits bolts up to class 10.9, while 140 HV washers are intended for class 8.8 and below. Using a soft washer under a high-grade bolt lets the washer deform before the bolt reaches its preload, which quietly loses clamping force.